MLT Thrster

jaiii · Post by **jaiii** » Sun May 29, 2011 7:52 am

Good day.

English is not my first language then I a soryy fo errors.

Me very interested in the principle of MLT thruster.
And generally capture the momentum by dielectric and EM field.
So I have a query on what principle these devices work?.
Why is there AC EM field?
And it can not be replaced with a ferrite dielectric material?

BTW
Can someone send me a good type of literature?

Thank you.

Tech · Post by **Tech** » Sun May 29, 2011 11:59 am

Jaiii, there are already topics about this -
viewtopic.php?t=2215&postdays=0&postorder=asc&start=0
viewtopic.php?t=3096&postdays=0&postorder=asc&start=0

Welcome to the board, it´s nice to know, that I´am not the only one here from Slovakia.

jaiii · Post by **jaiii** » Sun May 29, 2011 3:43 pm

Thank veri much.

chrismb · Post by **chrismb** » Sun May 29, 2011 4:45 pm

jaii - use firefox, or download 'iespell' if you use explorer.

Spellchecking won't fix your grammar, but at least you are half way to being understood.

jaiii · Post by **jaiii** » Sun May 29, 2011 9:17 pm

But can you antworth may question pleasse ?

Thank.

AcesHigh · Post by **AcesHigh** » Sun May 29, 2011 9:44 pm

I think Google Translator is the best...

hello, from Brazil, Jaiii

jaiii · Post by **jaiii** » Mon May 30, 2011 7:06 am

Google translator is veri bad I use it and have big promblems with it.
I try improove my grammar but if you understand .Pleasse antworth my
questions about MLT.

Thank veri much.

chrismb · Post by **chrismb** » Mon May 30, 2011 9:44 am

jaiii wrote:Google translator is veri bad I use it and have big promblems with it.
I try improove my grammar but if you understand .Pleasse antworth my
questions about MLT.

Thank veri much.

Jaii, the amount of effort people will put into the answers is affected by the effort you put into your questions. Do spellchecking and see what the translator suggests.

The links you've been given will answer all your questions so far. No need to ask again.

jaiii · Post by **jaiii** » Mon May 30, 2011 12:45 pm

I try correct my grammer with white smooke writer and only 2 or 3 errors
get.

And knew forums where don't carry of grammer but get ansvers.
And heere we discus about my english 2 days and a get only one antwoth.From user from may country.

Thank for your care about my English.
Good by.

chrismb · Post by **chrismb** » Mon May 30, 2011 1:25 pm

jaii

*I* spell check my posts and want to get the grammar right. Most people here do likewise, it seems.

For you as a non-english speaker, you should do at least the same as us. If not, then we can already see how much effort you want to put into communicating with us.

I'm sorry that you did not get the antworths you wanted. This isn't a service for people who want antworths, it is a community of people discussing things, and all people have to try to put effort into writing something that others can understand.

KitemanSA · Post by **KitemanSA** » Mon May 30, 2011 1:52 pm

Jaiii,
If you would like some answers to your questions, please visit the two prior topics about this subject as provided by "Tech" in the FIRST response to your post. If, after having read the two topics completely, you still have questions, then please ask them in one of those two topics.

Tech wrote:Jaiii, there are already topics about this -
viewtopic.php?t=2215&postdays=0&postorder=asc&start=0
viewtopic.php?t=3096&postdays=0&postorder=asc&start=0

Welcome to the board, it´s nice to know, that I´am not the only one here from Slovakia.

Please understand that the members of this board are NOT an answer service, and while we will do a lot of research to help common understanding, we are not very interested in looking thru old topic posts just so that you don't have to. ESPECIALLY on topics not directly Polywell related.

PLEASE stop this thread and read/post on the other two.

Thank you.

jaiii · Post by **jaiii** » Mon May 30, 2011 3:32 pm

Good day.

I am sorry that I said so but I was a little
angry that my English was for some
important and instead of talking about my issues to lecture me as I write mostly when I was at the beginning of my article apologized for errors in spelling.
Thank you for your reply and I do not think that this forum is the corresponding service.
In conclusion, if not I have to say about the topic. Not say anything and not teach others
.
By.

Diogenes · Post by **Diogenes** » Mon May 30, 2011 5:09 pm

jaiii wrote:Good day.

I am sorry that I said so but I was a little
angry that my English was for some
important and instead of talking about my issues to lecture me as I write mostly when I was at the beginning of my article apologized for errors in spelling.
Thank you for your reply and I do not think that this forum is the corresponding service.
In conclusion, if not I have to say about the topic. Not say anything and not teach others
.
By.

I wouldn't worry about it too much. Many people here post in perfect English, and yet what they say is still gibberish.

jaiii · Post by **jaiii** » Mon May 30, 2011 5:23 pm

Thank you. This is my speech.
Does it matter who says what.

This concludes this debate and I'm going to give
important things.

AcesHigh · Post by **AcesHigh** » Wed Jun 01, 2011 1:19 am

Diogenes wrote:
jaiii wrote:Good day.

I am sorry that I said so but I was a little
angry that my English was for some
important and instead of talking about my issues to lecture me as I write mostly when I was at the beginning of my article apologized for errors in spelling.
Thank you for your reply and I do not think that this forum is the corresponding service.
In conclusion, if not I have to say about the topic. Not say anything and not teach others
.
By.

I wouldn't worry about it too much. Many people here post in perfect English, and yet what they say is still gibberish.

Talk-Polywell.org

MLT Thrster

MLT Thrster

Thank

I try

RE

Re: RE

re may english