EMC2 news
Re: EMC2 news
It is something I have been thinking about (also in context of the Google- Tri Alpha- cooperation). At some point simulations and AI will become so good, that it will affect how we develop fusion reactors. At least we will be able to test ideas without having to build prototypes anymore. But I think that it will go even further than that at some point in the more distant future.
Re: EMC2 news
The current sim is based on First Principles, and is very detailed. It has produced some really good work. It is well beyond their sim work of the past.
The development of atomic power, though it could confer unimaginable blessings on mankind, is something that is dreaded by the owners of coal mines and oil wells. (Hazlitt)
What I want to do is to look up C. . . . I call him the Forgotten Man. (Sumner)
What I want to do is to look up C. . . . I call him the Forgotten Man. (Sumner)
Re: EMC2 news
ladajo wrote:Yes, I would say it is the most advanced 3D particle plasma sim out there. Part of the work has been to create the software. It runs on a multi-cell super computer. The outputs are impressive (and pretty).
I must have missed something. I've been glancing over the recent entries in this thread, and I am getting the impression you are a lot more intimate with these doings than the rest of us.
Did you somehow get a backstage pass on this organization and I missed the announcement?
‘What all the wise men promised has not happened, and what all the damned fools said would happen has come to pass.’
— Lord Melbourne —
— Lord Melbourne —
Re: EMC2 news
It is not news to some that I have intimate knowledge, not sure how you missed that. Granted, a select few have know that much longer than others. I remain limited in what I can share for now. I am also surprised that no-one has gone patent hunting of late.
Hopefully, within the next few months, more will be in public. Be patient.
Really, the next big issue is resourcing the next major phase. And this remains dependent on completing the sim work. Phase II Sim Runs(as I call it) are underway now.
Hopefully, within the next few months, more will be in public. Be patient.
Really, the next big issue is resourcing the next major phase. And this remains dependent on completing the sim work. Phase II Sim Runs(as I call it) are underway now.
The development of atomic power, though it could confer unimaginable blessings on mankind, is something that is dreaded by the owners of coal mines and oil wells. (Hazlitt)
What I want to do is to look up C. . . . I call him the Forgotten Man. (Sumner)
What I want to do is to look up C. . . . I call him the Forgotten Man. (Sumner)
Re: EMC2 news
I admit that I have looked every now and then to see if the current patent application has been accepted, but I have not found any news on that. I have also not found any new patent application.ladajo wrote:I am also surprised that no-one has gone patent hunting of late.
-
- Posts: 2484
- Joined: Fri Jun 19, 2009 5:53 am
- Location: Third rock from the sun.
Re: EMC2 news
There is more than one on this forum that is close.(not me but others)
I am not a nuclear physicist, but play one on the internet.
Re: EMC2 news
Simulations are very useful. And NOT to be trusted without validation, for which you need to run physical systems. My experience in computer simulation tells e that even with all the assumptions right there are ways for a simulation of a complex system to go wrong.
The daylight is uncomfortably bright for eyes so long in the dark.
Re: EMC2 news
I second that. NEVER let yourself believe that the simulation is reality. They are much more helpful after experiments, used to discover where the current understanding of reality is amiss.
Aero
Re: EMC2 news
Of course simulations need to be confirmed by experiment, especially in a field like this. But looking into the future, they could be used to rapidly test millions of combinations before going into actual experimental verification, which could vastly accelerate nuclear fusion (and other) research.
Re: EMC2 news
My experience with models is mixed. Run tests, get loads of data, tune model to fit, make a change and all the test need running again for new tuning parameters. In other words, some complex systems have extreme sensitivity to boundary conditions.
On the other hand if you run the model, get results, test and data looks good, then you may have something. It is not uncommon for those that have not worked with complex systems to not grasp that some systems are just nasty.
I would be interested in why a low profile is desired? I have an extreme distrust of secrecy. For instance in real estate it a common practice to use delay and promises to secure another property, that once secured screws the the other. Or, secrecy could be used to enable a foreign country or investor to do a deal contrary to American interests. Or, it may be used to prevent a bidding war. Etc.
On the other hand if you run the model, get results, test and data looks good, then you may have something. It is not uncommon for those that have not worked with complex systems to not grasp that some systems are just nasty.
I would be interested in why a low profile is desired? I have an extreme distrust of secrecy. For instance in real estate it a common practice to use delay and promises to secure another property, that once secured screws the the other. Or, secrecy could be used to enable a foreign country or investor to do a deal contrary to American interests. Or, it may be used to prevent a bidding war. Etc.
Counting the days to commercial fusion. It is not that long now.
Re: EMC2 news
Yup.Aero wrote:I second that. NEVER let yourself believe that the simulation is reality. They are much more helpful after experiments, used to discover where the current understanding of reality is amiss.
The development of atomic power, though it could confer unimaginable blessings on mankind, is something that is dreaded by the owners of coal mines and oil wells. (Hazlitt)
What I want to do is to look up C. . . . I call him the Forgotten Man. (Sumner)
What I want to do is to look up C. . . . I call him the Forgotten Man. (Sumner)
-
- Posts: 1439
- Joined: Wed Jul 14, 2010 5:27 pm
Re: EMC2 news
Explain to me the algorithm, please?ladajo wrote:Yes, I would say it is the most advanced 3D particle plasma sim out there. Part of the work has been to create the software. It runs on a multi-cell super computer. The outputs are impressive (and pretty).
Is it an all-pairs method? If so, does it use fast multi-pole method or some variation of?
is it particle in cell, discrete element...?
how are the "cells" broken up? different spatial regions? different regions of phase space?
how are the outputs "pretty"? what is being outputted? a simple spatial representation?
so many questions...
Re: EMC2 news
You will have to wait. Sorry. I can share that the coding effort was collaborative between some of the top minds in the field.
There is nothing else like it right now. It is the cutting edge for plasma sims. and proprietary.
There is nothing else like it right now. It is the cutting edge for plasma sims. and proprietary.
The development of atomic power, though it could confer unimaginable blessings on mankind, is something that is dreaded by the owners of coal mines and oil wells. (Hazlitt)
What I want to do is to look up C. . . . I call him the Forgotten Man. (Sumner)
What I want to do is to look up C. . . . I call him the Forgotten Man. (Sumner)
-
- Posts: 1439
- Joined: Wed Jul 14, 2010 5:27 pm
Re: EMC2 news
Then I bet it uses my distributed dynamic octree idea for massive scalability with near O(n) performance.ladajo wrote:You will have to wait. Sorry. I can share that the coding effort was collaborative between some of the top minds in the field.
There is nothing else like it right now. It is the cutting edge for plasma sims. and proprietary.
-
- Posts: 1439
- Joined: Wed Jul 14, 2010 5:27 pm
Re: EMC2 news
Wait, by top minds do you mean top physicists or top coders?ladajo wrote:I can share that the coding effort was collaborative between some of the top minds in the field.
big difference...